GB-Lyneham: 700004198 Purchase of 3 x Wet Collection Grinding Bench

NOTE: This notice was updated on 15 May 2019 for the following reason: Additional CPV codes added and date extended by one week to the 14 Jun 19.(The Authority is seeking to purchase 3 x wet collection grinding bench's, these will be installed at our MOD Lyneham site and come complete with training material and familiarisation training post installation, the Authority also seeks as part of the procurement an ongoing annual service requirement for 5 years and a 5 year warranty on the equipment's covering industry standard warranty terms.

The exact requirement will conform to the following specifications and as further detailed in the SOR within the tender docs of 70004198.

Each system must have the following specifications: IP65 Rating operating on 415v three phase 50 Hz supply.

A bench constructed from corrosion/heat resistant material with a minimum working area of 1500 mm in length, 650mm in width and 850mm high.

The overall dimensions of the grinding bench shall be no more than 1800mm wide, 1000mm deep and working height 850mm high; overall height to be no more than 1800mm including rear and side protective screening.

A wet type filtration system with collector.

The construction must be metal material with appropriate finishing.

The collector must have anti-spark features, noise reduction, and fluid level control, drain valve, sludge bin and be able to handle corrosion inhibitors.

A downdraft extraction facility with dust collection to facilitate simple disposal of aggregated dust; suction to be minimum of 1750 m³/h.

Produce training materials/user maintenance guides & instructions that cover normal usage and approved user fault-finding and maintenance procedures.

Annual Servicing for 5 years.

5 year Warranty covering industry standard warranty terms.

Tenders are requested to complete both the SAQ and return a completed Tender including the Cyber Elements described within the tender.

Suppliers must read through this set of instructions and follow the process to respond to this opportunity.

The information and/or documents for this opportunity are available on https://www.contracts.mod.uk/delta.

You must register on this site to respond, if you are already registered you will not need to register again, simply use your existing username and password.

Please note there is a password reminder link on the homepage.

Suppliers must log in, go to your Response Manager and add the following Access Code: DCM5H752S5.

Please ensure you follow any instruction provided to you here.

The deadline for submitting your response(s) is 07/06/2019 12:00.

Please ensure that you allow yourself plenty of time when responding to this invite prior to the closing date and time, especially if you have been asked to upload documents.

If you experience any difficulties please refer to the online Frequently Asked Questions (FAQ's) or the User Guides or contact the MOD DCO Helpdesk by emailing - support@contracts.mod.uk or call 0800 282 324.)