Northumbria University at Newcastle
GB-Newcastle Upon Tyne: TeT21/0047 Provision of Thermal vacuum chamber for satellite component testing
This sits in the upper-middle of the Construction band — a substantial contract for the sector. Based on 64,002 valued Construction tenders in our corpus.
NOTE: This notice was updated on 18 January 2022 for the following reason: Extended submission date for EOIs/bids(We require a vacuum chamber with pumps and thermal plate capable of reaching 10-6 mbar pressure, or below, with a thermal control system for the internal volume that allows fixed and cycling temperatures between -35 and +100 degrees C.
The internal volume of the chamber should accommodate a test unit of minimum size 350mm x 100mm x 100mm (i.e. the internal volume should be at minimum 500mm x 300mm x 300mm), however larger internal volume is desirable.
The chamber should have at least one feed through for power and data communications to the device inside such that tests of electronics can be controlled from outside of the chamber.
The system should include any temperature and pressure sensors required for accurate operation.
The system should not require cryogenic cooling or any form of liquid nitrogen supply, and be suitable for installation in a laboratory setting on the second floor.
The system should include all pumping, cooling, command and control devices required for complete functionality.)
What the supplier must deliver
The internal volume of the chamber should
The internal volume of the chamber should accommodate a test unit of minimum size 350mm x 100mm x 100mm (i.e. the internal volume should be at minimum 500mm x 300mm x 300mm), however larger internal volume is desirable.
The chamber should have at least one
The chamber should have at least one feed through for power and data communications to the device inside such that tests of electronics can be controlled from outside of the chamber.
The system should include any temperature
The system should include any temperature and pressure sensors required for accurate operation.
The system should not require cryogenic cooling
The system should not require cryogenic cooling or any form of liquid nitrogen supply, and be suitable for installation in a laboratory setting on the second floor.
The system should include all pumping, cooling
The system should include all pumping, cooling, command and control devices required for complete functionality.).
Derived from the notice text — always confirm against the original documents.
Make the case to bid
Reveal who to approach at Northumbria University at Newcastle, and generate a go-to-market strategy from their news, accounts and people.
- OCID
- 9c6e8cdb-b8ee-4217-b4e6-2ff6fd0d02a3
- Stage
- contract · Contract
- Source
- Contracts Finder
- Buyer ref
- BIP657133772
Contains public sector information licensed under the Open Government Licence v3.0. Source data © Crown copyright.
Who wins this kind of work
The suppliers and buyers around this opportunity — drawn from official award data. Drag to orbit; click a node to explore.
Top suppliers & buyers in Construction
Assembling the market network…
Northumbria University at Newcastle’s tender network
Assembling the network…
Similar open tenders
Contract for Supply and Install Control panel and commissioning of whole BMS and Interlinking plant room components
City & County of Swansea
Provision for Lee Valley Sewardstone Campsite Shower Rooms Refurbishment
Lee Valley Regional Park Authority